High Stability Reference Mirror
LM399 is a Precision Reference chip. From this a dual polarity mirrored reference is derived using OP07 op-amps. This assembly is mounted in a miniature oven to ensure temperature stability.
Tagged: Calibration
Millivolt Source for Calibration
I was looking for a simple MILLIVOLT SOURCE for ion electrode testing and came across your pdf schematic. This design would appear to fit my needs perfectly, but I have a couple minor questions...
Simple Millivolt Source for Calibration
This is a modification of a mV Source that can be whipped up easily. You could use a DPM or Multimeter to read the output. The ability of this circuit to perform well depends...
Significance of Current Loop 4 to 20 mA Standard
Subject: delabs comments – Tell Me. message: why 4-20mA standard. why not 2-22mA or any thing else Mail from MU they knew you would come up with a question like this. so see this...
Building a mV Milli-Volt Calibrator Source
Hi, I am trying to build this mV source that you have drawn on your site. It requires a 5vdc power source with a 1k resistor in line with a 10K pot. Your schematic...
Millivolt Source with Digital Potentiometer
Variable Parameters like voltage, current can be obtained by using a Digital Potentiometer. Microcontrollers or Counters operate FET CMOS Analog Switches. The switches configure resistor networks to adjust circuit performance. It could be a...
Millivolt Source – Field Calibration Current Loop
This is easy to rig millivolt source for field calibration or troubleshooting of 4-20 mA current loops. Here a Darlington pair is used for current amplification which reduces the Ib error as gain is...
Millivolt Circuit ICL7129 MAX7129
My application is to calibrate some instruments with help of this source. I’ve studied your circuit earlier also., but I want a battery operated mV source. upto 100mV full scale which is portable but...
