Battery Management and Supply Design
As you have have pointed out, my circuit is not driving any motor or such loads…but it is driving a Wireless Module which draws about 165mA to 240mA from my circuit during transmission [for...
As you have have pointed out, my circuit is not driving any motor or such loads…but it is driving a Wireless Module which draws about 165mA to 240mA from my circuit during transmission [for...
I am having trouble preventing my rs latch from erroneously setting. The circuit is a voltage threshold detection circuit with a nand gate whose output is tied to a SR latch.
I’ve seen on the net the schematics for RS232 with Opto-Isolation. The supply on the PC side is from the PC. The supply from the line side is external? I’ve seen the 3 connectors...
I am required to design an electronic system that monitors the temperature between(22-24 degrees Celsius). Given are power supply, Analogue subsystems and digital subsystems. the accuracy of the digital control circuit is limited by...
I´ve been looking at the mini-three wire 4-20mA transmitter and it is everything I need to try a new way of measuring the temperature. It is great but there are a few questions about...
message: what is the pros and cons of rtd,over thermocouple Mail from MU Read the pages in links below, that ought to clarify your doubts. Last edited February 16, 2007 RTD-TC-Compare Comparison of Thermistors,...
This is the standard configuration on how to Interface a uC like 8051 to PC RS232 with MAX232A. The UART or Serial port was not present in 8049/8749 chips which were the ancestors of...
The Edsion Filament lamp may be less popular, but it is the most cost-effective light even today. It is very affordable, The light is soothing to the eyes and best of all gives a...